10
i3-TRNG-CAMS-Ax47DC-UM.indd
Rev. 170322
1.
Mounting holes (x3)
2.
Dome bubble housing / Dome cover
3.
Screws securing the dome bubble housing to camera module (x3, silver)
4.
Lexan bubble
5.
Screws attaching camera module to the camera base (x4, black)
6.
Lens base. Rotate to adjust lens.
7.
Camera Lens Assembly. Pan to adjust lens.
8.
Tilt Bracket with two locking screws. Loosen the screws and tilt to adjust lens angle.
9.
Inner Liner / Shroud. Attach the desiccant tot he inside of the inner Liner, without
obstruction the lens movement.
10.
Camera lens.
11.
RJ45 Ethernet PoE Port with waterproof RJ45 connector assembly.
Insert an Ethernet cable into the port for network connection as well as PoE (Power
over Ethernet) capability. To maintain water-resistant rating in outdoor installations,
make sure to use the included waterproof RJ45 Connector assembly.
12.
Reset/Default button. Press for 1 second to reboot the camera. Press for 6 seconds
to restore camera settings to factory defaults.
13.
Micro SD Card slot for on-camera video storage. (Micro SD card sold separately).
5. Installation
Optional Mounting Accessories
• Ax61BB (Back Box 3/4” & 1/2” NPT). Use for pendant mount, or pole mount.
• DB60 (Goose Neck Bracket 3/4” NTP). Together with the optional DB60CPM
bracket, DB60 goose neck bracket has the capability of being pole-mounted.
• DB60CPM (Pole Mount bracket for DB60)
Important. Please Read:
•
It is the installer’s responsibility to ensure that the mounting surface is suitable
for the chosen installation method.
•
Based on installation location and surface type, supplied screws and anchors
may not be adequate.
•
Mounting hardware is site-specific and may need to be supplied by the
installer.
