Appendix C- Upgrading Firmware
Annexxus cameras and systems are always shipped with the newest available firmware and do
not need a firmware update. However, in the unlikely event that the firmware will need to be
upgraded in the future, follow the instructions below.
Important:
Firmware may only be upgraded by the administrative
user.
For firmware update:
1. Open the Annexxus Web Viewer application.
2. Click the
Setup
button.
3. In the
Device Information
setup tab, select the
Firmware Upgrade
radio button.
3. Click
Browse...
and then locate and select the newest *.anx firmware file and click
Open
.
5. Click
Upgrade
. The remote Upgrade Status message will change to "Device is updating,
please wait!"
6. Wait until the Status message changes to "Update completed!"
7. Click the
Restore
button in the bottom left corner of the
Setup
window to apply default settings
from the new firmware package. All custom settings will be erased.
8. Click
OK
in the
Warning
message window shown below.
9. The "Upgrade completed, please reboot device!" message will be displayed. Click
OK
to close
it.
10. Reboot the Annexxus the camera.
11. Close the Annexxus Web Viewer and open a new Internet Explorer window.
12. In the IE window, go Tools -> Properties. The
Internet Options
window will be displayed.
26
