2. Enter the user name in
User Name
field. User name may not exceed 16 characters.
3. Enter the password in
Password
and
Re-enter Password
fields. The password may only
consist of numbers and may not exceed 16 characters.
4. Configure user privileges. The following privileges can be assigned to the operator user(s):
User Privilege
Privilege Limitation
Live Video Viewing
(configured per channel)
Check off to allow the operator to view live video.
Save Settings
Check off to allow the operator to make changes to
Annexxus setup.
Control PTZ
(
only applies to
Ax32V2M series model)
Check off to allow operator to control the camera’s
electronic Point/Tilt/Zoom (ePTZ) function.
Upgrade, Format,
Reboot
Check off to allow the operator to upgrade the camera
firmware or to reboot the Annexxus device.
To assign Live Video Viewing, check off
Check Mark to Enable Privilege for Channel(s)
then
make sure
Channel 01
is checked. For the
Save Settings
,
Control PTZ
and
Upgrade, Format,
Reboot
privileges check off
Check Mark to Enable Privilege
.
13
