2
of the Hub end.
** A Cat.5, 5e, 6, 7 UTP installation cable is converted to a two-wire cable as follows: Open the four twisted wire
pairs and remove approx. 7 mm of insulation from the ends. Then connect the four white wires and the four
colored wires to one cable respectively and attach wire-end sleeves.
Product Application Diagram
The Ethernet over 2-Wire system allows the Star topology or Daisy-chained communication. It supports virtually
any type of wire, including coax, UTP, STP, even un-twisted wire. And different wire types can be concatenated
together, as needed.
Star Topology
Daisy Chain
Open the four twisted
wire pairs
Remove insulation from
the ends of all eight wires
Combine 4x white
and 4x colored
Plug DC56V power adapter to EPOC-131VA or DC48V to EPOC-131PS when the IP Camera cannot receive power.
