User Manual
Appendix C
Maintenance
- 39 -
APPENDIX C: MAINTENANCE
This equipment is extremely rugged and does not require a lot of maintenance.
Remember that electrical equipment should be handled with care and used
accordingly to its specifications.
Cleaning the Display Screen
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and
other particles. Do not use acetone, ethyl alcohol, toluene, ethyl acid or
methyl chloride to clear the panel. It may permanently damage the display
screen.
You can apply a small amount of non-ammonia; non-alcohol based glass
cleaner onto a clean, soft, lint-free cloth and wipe the screen.
Never spray or pour any liquid directly on the screen or case.
Do Not
use water or oil directly on the display screen. If droplets are
allowed to drop on the screen, permanent staining or discoloration may
occur.
Cleaning the Casing
Use the following procedure to clean the equipment.
CAUTION/ ATTENTION
Always turn off the device and disconnect other peripherals
before cleaning and maintenance procedures.
Toujours
éteindre l’appareil et débrancher tous les périphériques
avant que les procédures de nettoyage et d'entretien.
Before Cleaning:
Make sure the device is turned off.
Disconnect the power cable from any AC outlet.
When Cleaning:
Wipe dust off the outside casing with a cloth slightly moistened with water
or mild ammonia-based cleaning solution. Do not use this cloth on a
display screen!
Do not use an abrasive cleaner or high pressure washer on the screen.
Do not rub the unit with a dry cloth. This action can result in a static charge
being built up and cause a spark. Always use damp cloth while cleaning
the unit.
WARNING!/ AVERTISSEMENT!
POTENTIAL ELECTROSTATIC CHARGE HAZARD
– SEE
INSTRUCTIONS
POTENTIEL ÉLECTROSTATIQUE CHARGE DANGER - VOIR
INSTRUCTIONS
