User Manual
Chapter 2
Installation
- 24 -
2.3 Connecting Other Devices
Use VGA, BNC or DVI-D cable to connect your display to external device.
Connect RS232 cable for touch capabilities.
CAUTION/ ATTENTION!
Observe all local installation requirements for connection cable type
and protection level.
Suivre tous l
es règlements locaux d’installations, de câblage et
niveaux de protection.
WARNING!/ AVERTISSEMENT!
Make sure the power is off when connecting and disconnecting the
connectors.
Assurez-vous que l'alimentation est coupée lors de la connexion et
la déconnexion des connecteurs.
2.3.1 VGA Connector
Plug one end of the 15-pin signal cable to the video signal connector at the rear
of the PC system and the other end to the Display. Secure the connectors with
the screws on the cable connector at both ends.
NOTE:
For the optimal results, select display native resolution as the
external computer’s input resolution.
VGA Cable
VGA Connector Pin Assignments
Pin № Signal Name Pin № Signal Name
1
RED
2
GREEN
3
BLUE
4
ID2/RES
5
GND
6
RED_RTN
7
GREEN_RTN
8
BLUE_RTN
9
KEY/PWR
10
GND
11
ID0/RES
12
ID1/SDA
13
HSync
14
VSync
15
ID3/SCL
