User Manual
Chapter 2
Installation
- 22 -
2.2.1 Connecting to AC Input Power Source (Default)
AC Power Input Requirements:
AC 100~240V, Universal, ±10%
Connect one end of the Military Grade power connector MIL-DTL-38999/1 to the
Display (CN2), and plug the other end of the power connector (CN1) in to a
working AC outlet.
Note:
Power cords vary in appearance by region and country.
Connector Pinouts:
WARNING!/ AVERTISSEMENT!
Serious injury due to shock is possible if unit is wired incorrectly or
connected to voltage exceeding the input voltage range.
Des blessures graves en raison du choc est possible si l'unité est
mal câblé ou connecté à la tension maximale de la plage de
tension d'entrée.
Pin №
Signal Name
A
VCC+
B
VCC-
C
GND