Compatible Input Formats
On-Screen Menu (continued)
The following SDI standards are supported by the V-R171-IMD-
HDSDI:
525i, 625i
1035i/60, 1035i/59.94 1080i/60,
1080i/59.94, 1080i/50
1080psF/24, 1080psF/23.98
720p/60, 720p/59.94, 720p/50
■
OSD Tally
Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend on the Tally
Source selected in the IMD Configuration submenu (
see page 19
).
When the Tally Source is set to Standard (contact closure), OSD Tally can be set to
Off
,
RGY
,
RG
, or
GR
:
On-Screen Menu
• Off
On-screen tally is disabled
• RGY
Red, yellow, or green tally signals are indicated at both the bottom left and bottom right corners of the
screen. Two or three colors are shown simultaneously by subdividing each tally indicator
• RG
Red tally is shown at the bottom left of the screen, and green is shown at the bottom right.
• GR
Green tally is shown at the bottom left of the screen, and red is shown at the bottom right.
The following diagrams show RGY, RG, and GR OSD Tally modes:
8
Main
Marker 16:9
Off, 95%, 93%, 90%, 88%, 80%, 1.85:1, 2.35:1, 4:3,
14:9, 13:9
Marker 4:3
Off, 95%, 93%, 90%, 88%, 80%
Marker Backgrd
Off, 50% Gray, Black
Marker Setup
Center Marker
Off, On
CTemp/Gamma
55K, 65K, 93K, Linear
Monochrome
Off, On
Blue Only
Off, On
Pixel to Pixel
Off, On
Aspect Ratio
4:3, Scaled 4:3, 16:9, 16:9 Centered
Video Config
Curtain Color
Blue, Red, Green, White, Black
Gray Levels
RGB = 000 - 255 (8 unit steps)
Function 1
Marker, Center Marker, Marker Background, IMD, Time
Code, OSD Tally, Audio Monitor, Aspect Ratio, Pixel to
Pixel, CTemp/Gamma, Blue Only, Monochrome
Function 2
Marker, Center Marker, Marker Background, IMD, Time
Code, OSD Tally, Audio Monitor, Aspect Ratio, Pixel to
Pixel, CTemp/Gamma, Blue Only, Monochrome
Load Config
Mfg, User 1, User 2, User 3, User 4, User 5, User 6
System Config
Save Config
User 1, User 2, User 3, User 4, User 5, User 6
IMD State
Off, On
Status Display
Off, On
OSD Tally
Off, RGY, RG, GR, IMD
LED Tally
Off, On
Anc. Time Code
Off, LTC, VITC
OSD Config
Audio Monitor
Off, On
IMD Protocol
I-Tech, Image Video, TSL v4.0, I-Tech-IV
IMD ID#
000-255
IMD Group #
001 -254
IMD Name
User Defined (16 chars max.)
IMD Baud Rate
300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200
IMD Fixed Align
Center, Right, Left
IMD Fixed Color
Red, Green, Yellow
IMD Fixed Str
User Defined (16 chars max.)
Tally Source
Standard, Image Video HW, Image Video 422,
St IV422, TSL/I-Tech 422
IMD Config
IMD Tally Mode
T1, T2, T1T2, T2T1, T1 -, T2-, T1T2-, T2T1 -
When the Tally Source is set to TSL/I-Tech 422, OSD Tally can be set to
Off
or
IMD
:
• Off
On-screen tally is disabled
• IMD
Red, yellow, and green tally is displayed according the protocol commands. Green, red, and yellow colors
are shown individually on either the bottom left or right of the screen.
17
OSD CONFIGURATION SUBMENU (continued)
