I-Tech JKP115-801e, Руководство пользователя

Страница: 30 / 39

2. An available serial port on the computer.
3. A custom serial cable (8 pin to RS232 9 pin) included in package .
4. Firmware update files available at customer support web site.
Set Up
To setup for the flash upgrade, do the following:
1. Open the firmware upgrade program by double clicking on the latest firmware file from
customer support web site.
2. Use a computer that is not connected to your KVM computer ports.
3. Connect the power cord to the power jack of the KVM switch. Then plug the power cord into
an available power outlet.
4. Using a serial cable (8 pin to RS232 9 pin) connect an available COM port on your computer.
Take the other cable end and connect it to the FLASH port on the rear of the KVM switch.