background image

9

10

Product Specifications

Bluetooth Specification: 

Version 2.0 Class 2

Bluetooth Profile Supported: 

Headset and Handsfree

Range of Frequency: 

2.4GHz Spectrum

Reception distance: 

10 metres

Normal Charging Time: 

Within 3 hours

Talk Time*: 

Up to 12 hours

Standby Time*: 

Up to 180 hours

Dimensions: 

56 (L) x 20 (W) x 26 (H) mm

Weight: 

12.5 grams

*may vary due to users’ operation mode and mobile phone settings

Declaration of Conformity

We, i.Tech Dynamic Ltd., declare that the following product:
Product Name: i.Tech Arrow Lite
Model No.: C51-A06001-XX
Is in conformity with the following essential requirements of Council Directive 1999/5/EC ( 
referred to as R&TTE Directive ) : Article 3.1a, 3.1.b and 3.2. and the product is manufactured 
in accordance with Annex II of above directive.
A copy of the Declaration of Conformity can be found at:
http://www.itechdynamic.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions:

 (1) this device may not cause harmful interference, and

 (2) this device must accept any interference received, including interference that may cause 

undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment.

i.Tech declares under our sole responsibility that the headset is in conformity with the 

provisions of the following Council Directives: 1999/5/EC.

Dispose of the packaging and this product in accordance with the latest provisions.

10/2006
Printed in China

•  Turn off your headset prior to boarding an aircraft. Do not use your headset inside an aircraft.
•  To prevent damage to your hearing, please do not set the listening volume too high.
•  Never use the headset while taking a bath. 
•  Do not use the headset in a sauna or steam room.
•  Do not keep your headset near a wash basin or other wet places.
•  Do not use the headset outdoors in the rain.
•  Do not clean the headset while it is being charged. Always unplug the charger first before 

cleaning the headset.

•  Do not attempt to modify the headset for other purpose.
•  Do not attempt to force open or mutilate the built-in battery.
•  Replace the earphone when it shows signs of breaking from the wire.
•  Disposal of the packaging and the headset should be done in accordance with the local 

regulations.

Troubleshooting

If you are unable to connect your headset and mobile phone, please try the following:
•  Ensure your the battery is fully charged. Turn off your headset, and then turn it on again. 
•  Ensure the headset is paired with your mobile phone. 
•  Ensure your mobile phone’s Bluetooth function is activated. (For some phone models, a 

headset icon will appear on the phone’s screen.) Please refer to your mobile phone user guide 
for specific instructions.

•  Ensure the headset is within 10 metres of your mobile phone and there are no obstructions, 

such as walls or other electronic devices, in between.

If the above suggestions do not solve your problem, please recharge the headset and remove 
your mobile phone battery for a while. Then start pairing again. 
The i.Tech Arrow Lite Bluetooth Headset is compliant with and adopts the Bluetooth Specification 
Version 2.0 Class 2. However, interoperability between the headset and other Bluetooth-enabled 
products is not guaranteed because it depends on compatibility. For more information on the 
compatibility between the headset with other Bluetooth-enabled products, please check with 
the respective manufacturer or visit http://www.itechdynamic.com

Содержание Arrow Lite






Отзывы: