background image

Guide No.: GH68-12459A
09/2006. Rev. 1.0

Quick Start Guide

Samsung 
Bluetooth

®

 Headset 

WEP180

Thank you for purchasing the Samsung Bluetooth 
Mono Headset WEP180, we hope you will be 
delighted with its operation.
Take a moment before you get started to 
familiarize yourself with your new headset.

Make sure you have the following items with your 
headset: 

Make sure you have the following items with your 
headset: 

Travel adapter, User’s Guide, 1 ear hook

Travel adapter, User’s Guide, 1 ear hook

Check the accessories

Check the accessories

Charge your headset

Charge your headset

Charge the headset's battery fully before using 
the headset for the first time.

 Plug the travel adapter into the jack on the

    headset.

 

Plug the travel adapter into the electrical 

    outlet.

 

3

  Remove the travel adapter from the headset.

• Charge the headset until the red light on the  
   headset turns to blue.
• The headset will be fully charged in 
   approximately 2 hours 30 minutes.

Before you can use your headset, you must pair it 
with your phone.

Put your headset in 
pairing mode

Turn on Bluetooth on your 
phone and pair with headset

Your phone and headset are now paired and 
ready to make and receive calls. To confirm 
they are operating properly, make a call:

1

 

 Place the headset over your ear. 

    See Wearing the headset on the reverse 
    side of this guide.

2

 

 On your phone, make a call to the number 

    you want.

3

 

 If your phone and headset are successfully 

    paired, you will hear ringing on the headset.

After you have successfully paired your phone 
and headset, you do not need to repeat these 
initial setup steps each time you use the 
headset.

Test and use

Using your WEP180

See Features and Functions Guide 
on the reverse side of this guide 
for information on using your 
WEP180.

 Ensure that the headset is off (see Turn

    headset on/off on the reverse side of this guide).

 Press and hold the Multi-Function button until 

    the indicator light turns on in blue 
    (approximately 8 seconds).

Before using your headset

Multi-Function

button

Earpiece

Volume control

buttons

Indicator light

Adapter jack

Microphone

NOTES:
• The headset cannot be used while charging.
• Use only a Samsung-approved charger or adapter.

Start here

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and 
pair with headset
Test and use

Get connected in 4 quick steps

Headquarters:
1301 East Lookout Drive Suite 150 
Richardson, TX 75082  

Internet Address: 
http://www.samsungmobileusa.com/
accessories

Customer Care Center: 
1-888-987-4357

NOTE:
The items supplied with your headset and the accessories 
at your Samsung dealer may vary, depending on you 
country or service provider.

• Bluetooth version: 2.0 (compatible with devices of
  

 Bluetooth version 

1.1 or hig

h

er)

• Supported Bluetooth profiles:
  - Headset profile
  - Hands-free profile

 Set your Bluetooth phone to discover the  

    headset by following your phone's guide. 

    Typically, the steps involve going to the Settings,
    Connection, or Bluetooth menu on your 
    phone and then selecting the option to discover
    Bluetooth devices.

    Your phone will find the Samsung WEP180 
    headset. your headset will be displayed as
    Samsung WEP 180/185. 

 Select your headset. 

 When the phone asks if you want to pair with it,

    confirm by selecting Yes or OK

 Enter the headset passkey or PIN, 0000

Reviews: