| 5
Quick Start
ENGLISH
NOTICE!
Before installing, make sure that the latest drivers and updated BIOS are
installed on your system.
CONNECTING A HDMI MONITOR
The adapter is equipped with 2x 4K@60Hz HDMI for connecting one or two
external monitors or a projector with HDMI interface. Advanced plasma and
LCD monitors and TVs can be used as an imaging equipment. Use only high-
quality HDMI cables for connecting the monitor to the adapter. During the
additional monitor installation, the screen of the laptop Mac, tablet or PC can
flicker, but this is normal.
Most problems with the adapter and connected devices can be solved by
disconnecting the adapter’s Thunderbolt™ 3 cable from the Thunderbolt™ 3 port
on PC, Mac, smartphone or tablet and reconnecting it after approximately 10 s.
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity.
•
Use the device on flat surfaces – you will prevent it from slipping and
falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user
manual.
FREQUENTLY ASKED QUESTIONS
Available on our website
www.i-tec.cz/en
on the “FAQ” tab of this product.
2x HDMI Monitors
Resolution up to 4096x2160@60Hz
