- 9 -
CHARGING BATTERY PACKS
You must charge the battery packs for at least 5 hours
before you use the i-mop for the
time. Plug the
supplied power cord into the charging dock before
plugging it into an outlet.
Align the
battery packs with the charging dock
and slide each battery pack in from the side until you hear
a click. The battery packs are now
in position and
ready for charging.
Turn on the Battery Charger by pressing the switch;
the switch should light up to indicate the power is on,
and the battery packs are now charging, which is indicated
with an LED (red – charging/green – fully charged or no
batteries inserted) and voltage. It takes approximately
5 hours to fully charge an empty set of battery packs.
When the battery packs are charged, press the plastic tabs
(blue or grey) on the battery packs together and slide them
out of the charging dock.
RED LED
When the battery pack is charging, the red LED glows.
GREEN LED
When no battery pack is inserted or it is fully charged,
the green LED glows. When fully charged, remove the
battery packs of the Battery Charger and switch off the
Battery Charger.
ATTENTION:
If the i-mop isn’t used regularly, store the charged
battery packs in a dry, clean place. Make sure the
battery packs are charged monthly, even when not
in use.
