- 8 -
INITIAL SETUP
Set the i-mop in the “Park” position.
For the initial setup or anytime the squeegee is not
installed: pull the hose back up from the top while
guiding the lower half back into the i-mop to make
sure the vacuum hose will not be crimped during the
following procedure.
Move the upper body of the i-mop into the upright
vertical position.
Crouch down and while holding the handle with one
hand; hold the scrub deck with your other hand.
Lift up the scrub deck slowly until it’s standing upright
on the front wheels; guide the body towards the scrub
deck until it snaps into a resting position.
Please ensure that the i-mop is parked in a place where
nobody can bump into it. We recommend always
parking the i-mop close to a wall with the handle
pointing towards the wall and the brushes facing away
from the wall. This will ensure that the i-mop leans
against the wall if it is bumped.
