15
5.2
Assembly
1.
Place the main power cable in the cable strain relief (fig 8, pos 2), at a cable length of
approximately 10 to 12 centimeters from the machine.
2.
Place the main power cable plug (fig 8, pos 3) into the slot.
3.
Insert the hose (fig 8, pos 1) into the hose connector (fig 8, pos 5).
4.
Turn the hose clockwise to lock it into place.
5.
Insert the hose into the wand (fig 8, pos 6).
6.
Attach the desired tool (fig 8, pos 4) on wide end of the wand.
Figure 8
