27
7.2.3
Replacing the silencer on top of the motor
1.
Release the latch (fig 23, pos 2).
2.
Lift the head (fig 23, pos 1) under the grey
rim, on the side of the latch.
3.
Pull the head towards the side of the hose
entrance and lift it up (fig 23, pos 3).
4.
Place the head upside down, on an even
surface.
5.
Lift the motor filter (fig 23, pos 5) up to
remove it.
6.
Take out the old silencer (fig 24, pos 1)
from the top of the motor
7.
Place the new silencer.
8.
Place back the motor filter. Align the cut-
outs of the filter with the cut-outs on the
head of the i-vac 6® (see fig. 23).
9.
Push the filter over the motor until it is
completely down.
10.
Place the head back on the can. First on the
side of the hose entrance. Make sure that
the opening on the head sits around the lip
of the can.
11.
Fasten the latch.
Figure 24
