manualshive.com logo in svg

i-onyx VN-855V5, Руководство по установке и эксплуатации

Поделиться
Скачать
i-onyx VN-855V5 Скачать руководство пользователя страница 12

 

8

7. ALC LEVEL ADJUSTMENT POTENTIOMETER FOR DC DRIVE LENS 

This potentiometer is used only if the camera is fitted with a DC drive autoiris lens. It is used to control 

the amount of light striking the CCD image sensor. 

 

LENS-IRIS level control 

 

 

 

Monitor Screen 

LEVEL Control Direction 

To increase the brightness 

Clockwise 

To decrease the brightness 

Counterclockwise 

 

8. POWER IN (24 VAC)

 

This terminal accepts 24 VAC power source. Recommended power supply is minimum 9 W (when not 

using PoE).   

 

Caution: To prevent fire or shock hazard, UL Listed wire VW-1, style 1007 should be used for the 

cable for 24 VAC input terminal.

 

 

9. POWER INDICATOR LED 

This LED turns ON only when power is supplied and the DC-DC converter (or the regulator) inside the 

camera works properly or PoE is functioning. 

 

10. CCD DUST PROTECTIVE CAP 

Remove this cap before installing the lens. Do not handle or leave the camera with cap off. 

12. BACKFOCUS ADJUSTMENT 

This is used to position the CCD image sensor at the precise point of focus the lens. 

Backfocusing Fixed-Focal-Length Lenses 

1.  Install a lens and connect the camera to a monitor and power supply. 

2.  Open the iris completely. If an autoiris lens used, reduce the room lighting to allow the lens to open 

completely. This gives the most accurate results. 

3.  Adjust the screw slowly until the sharpest picture is obtained. This completes the adjustment. The 

backfocus adjustment screw is held in place by friction, so there is no locking screw. 

Backfocusing Zoom Lenses 

1.  Install a lens and connect the camera to a monitor and power supply. If the lens is motorized, it must 

also be connected to a lens control. 

2.  Position the camera 25~50 feet (8~16 meters) from a flat vertical surface suitable for focusing. A 

newspaper works well as a focusing target. 

 

  XX181-05-00 Rev 1208 VN-855V5 IP Camera 

 

Содержание VN-855V5







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды