i-onik BTH-002, Руководство пользователя

Страница: 20 / 25

38 39
When the headset connects with the mobile phone or Bluetooth transmitter
which supports A2DP, you can enjoy music through headset wirelessly.
Notes:
- For some mobile phones, when they are playing music, the music will transmit to the
speaker of mobile phone, you have to choose “transmit the sound through Bluetooth” in
the “setting” of music play interface, and then choose “BTH-002” in the device list, the
music will be transmitted to the headset. Please refer to the instruction of your mobile
phone for further information.
- When the volume of headset is adjusted to max. or min, you will hear a indication tone.
- Remote control the function of last song/next song/pause/revert, it needs your mobile
phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your
mobile phone or Bluetooth transmitter for further information.
Make sure the headset is off, press and hold MFB and + buttons simultane-
ously for about 8 seconds, release them when you hear two “DU” tones and
see red LED is on, now the headset restores to factory defaults, and the pairing
information will be deleted.
Charge the headset to make it reset.
rESTOrING TO FACTOrY DEFAULTS AND rESETTING
LED INDICATOr
pLAYING MUSIC
FUNCTION STATUS HEADSET OpErATION
Volume up playing music Short or long press + key
Volume down playing music Short or long press - key
pause playing music Short press MFB
play pausing Short press MFB
Last song playing music Short press < key
Next song playing music Short press> key
LED INDICATOr STATUS HEADSET
red LED is on Charging
red LED is off Finish charging
LED INDICATOr STATUS HEADSET
red and blue LEDs blink alternately pairing mode
Blue LED quickly blinks once every
2 seconds.
Not connected to a device
Blue LED quickly blinks twice
every 4 seconds
Set up HFp or A2Dp connection
CHA
rGING
pAI
rING