i-onik BTH-002, Руководство пользователя

Страница: 15 / 25

28 29
Note: In order to save power, the headset will automatically switch off if no devices can be
connected within 5 minutes after switching on.
CHArGING THE HEADSET
SWITCH ON/OFF HEADSET
First time charging
Before you use this Bluetooth headset, please charge the battery of i.onik
®
BTH-002 fully.
Next time
When you hear three warning tones of “DONG” every 20 seconds, at the same
time, the red light blinks two times. It means the battery is low power and need
to be charged. There are two types of charging as below:
A. Charging the battery with travel charger
Step 1: Plug the travel charger into standard AC power outlet.
Step 2: Connect the travel charger with the charging port of the headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3-4 hours to charge the headset fully.
B. Charging the battery with USB cable
Step 1: Insert USB charging cable into USB port of PC.
Step 2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3-4 hours to charge the headset fully.
Note: Choosing travel charger or USB cable depends on different countries or areas and actual
demands.
Warning:
1) The battery is recycled.
2) Do not dispose of the battery in fire, as it may cause explosion.
FUNCTION OpErATION LED-INDICATOr INDICATION
TONE
Switch on press the MFB
button for 3-5
seconds, and
release it till the
blue LED is on
Blue LED is on
for 1 second
A long “DI” tone
Switch off press the MFB
button for 3-5
seconds, and
release it till the
red LED is on
red LED is on
for 1 second
A long “DI” tone