i-onik BTH-002, Руководство пользователя

Страница: 16 / 25

30 31
Note: The pairing mode will last 2 minutes. If the headset still can’t pair with any Bluetooth
devices after 2 minutes, it will switch into standby mode automatically.
pAIrING THE HEADSET WITH BLUETOOTH DEVICES
Please make sure your mobile phone has Bluetooth function that can be
used. Specific pairing procedures may vary with different mobile phone.
Please refer to your mobile phone manual for further information. Steps as
follows:
1) Please keep the headset and mobile phone in the range of 1 meter when
pairing.
2) Make the headset enter into pairing mode (Please refer to “how to enter
into pairing mode”).
3) Start the Bluetooth function of mobile phone and search the Bluetooth de-
vices. After searched, select “i.onik BTH-002” in the Bluetooth device list.
4) According to indication, enter password or PIN No: ”0000”, and press the
key of ”Yes” or “confirmed”.
5) After successful pairing, select “i.onik BTH-002” in the Bluetooth device
list, and press “connect”.
6) After successful connecting, the blue LED of the headset quickly blinks
twice or three times every 4 seconds.
Notes:
- If the pairing is not successful, please switch off headset firstly, and then re-pair according
to the steps 1-6 mentioned above.
- After pairing is successful, paired devices will remember each other. Unless pairing
information is deleted because of new pairing, no need to pair when use next time. The
headset can remember 8 paired devices, when paired devices exceed 8 paired devices,
the first one will be replaced.
- If you want to pair the headset with other devices, please pair it with the new device
according to steps 1-6 mentioned above.
pAIrING THE HEADSET WITH BLUETOOTH MOBILE pHONE
FUNCTION OpErATION LED-INDICATOr INDICATION
TONE
Enter pairing
mode
Make sure the
headset is off.
press and hold
MFB button for
7-9 seconds,
and release it
till the red and
blue LEDS blink
alternately.
red and blue
LEDs blink
alternately.
Two “DU” tones
H
OW
TO
ENTE
r p
AI
rING
MODE