EMS i-MO 540 Series Hardware Installation Guide
Version
2.0
ELECTRONIC MEDIA SERVICES LIMITED
PASSFIELD BUSINESS CENTRE, LYNCHBOROUGH ROAD, LIPHOOK, HAMPSHIRE, GU30 7SB, UK
Tel:
01428 751655 |
Fax:
01428 751654 |
E-mail:
Page
9
of
18
7) Power switch
Mains power to the unit is supplied via a power input at the rear of the unit as shown below. To switch the
unit on the power switch should be set to the on position (1).
The power switch at the front of the unit is used to turn the appliance on (boot) or off (shutdown). As soon as
the button is pressed it will illuminate to show that the appliance is powering up. Press the button again to
start the power off sequence. The message on the status display will change and when the power off
sequence has completed the light in the button will extinguish.
Note
: Do
NOT
hold the power button in unless specifically instructed to do so by a support engineer
