EMS i-MO 540 Series Hardware Installation Guide
Version
2.0
ELECTRONIC MEDIA SERVICES LIMITED
PASSFIELD BUSINESS CENTRE, LYNCHBOROUGH ROAD, LIPHOOK, HAMPSHIRE, GU30 7SB, UK
Tel:
01428 751655 |
Fax:
01428 751654 |
E-mail:
Page
7
of
18
3) Attach 3G/4G antennas and cables
Up to 3 antennas may be provided dependent upon the number of modems installed. The antennas must be
mounted outside and as high as possible. The antennas should be spaced at least 1 metre apart from each
other.
The connector on each aerial cable should be attached to the aerial sockets (1-3) as shown below.
Note
:
Connectors should be touch tight only! Do not over tighten.
4) Attach network cables (optional)
The i-MO appliance provides six Ethernet ports at the rear. Each of these can be individually configured as
WAN or LAN ports. Network cables (not provided) can be connected as shown below. The default
configuration is all ports configured for LAN usage (6 port network hub).
Note
: The first port on the left as viewed from the rear is a Console (RS232) Port available for unit
configuration purposes only. This port is
NOT
available for network use.
