I.G.F. Italstampi 4200, Руководство по эксплуатации и техническому обслуживанию

Страница: 19 / 41

I.G.F. Italstampi
PAGE: 19
01.04 Safety Principles
BEFORE TURNING ON THE MACHINE
,
AND EVERY TIME A DOUBT ABOUT ITS WORKINGS SHOULD
ARISE
,
EVERY OPERATOR IS OBLIGED TO CAREFULLY READ THE INSTRUCTIONS FOR USE
.
ENSURE
THAT THE PEOPLE CONCERNED KNOW AND ADHERE TO THE CONTENTS OF THE MANUAL
.
DURING PHASES OF RESEARCH OR REMOVAL OF ANY CAUSE OF DAMAGE OR INCONVENIENCE CON-
CERNING THE MACHINE
,
TAKE ALL NECESSARY MEASURES TO PREVENT ANY DAMAGE TO PEOPLE
OR THINGS
.
REMOVE THE ELECTRIC TENSION
(
SEPARATION OF THE MACHINE FROM THE ELECTRIC
NETWORK
)
BEFORE APPROACHING THE PROTECTIVE DEVICES
.
AT THE END OF ANY INTERVENTION THAT REQUIRES THE REMOVAL OR THE NEUTRALIZATION OF ANY
COMPONENT CORRELATED TO SAFETY
(
BARRIERS
,
SENSORS
,
PROTECTIONS
,
ETC
.),
CARRY OUT
THE PUTTING BACK INTO OPERATION ENSURING THE CORRECT POSITION AND EFFECTIVENESS
.
IT IS ABSOLUTELY FORBIDDEN TO NEUTRALIZE
,
REMOVE
,
MODIFY OR IN ANY OTHER WAY RENDER
INEFFICIENT
,
ANY PART OF THE SAFETY DEVICES
,
PROTECTIVE DEVICES
,
OR CONTROLS OF THE MA-
CHINE
,
WHEREVER POSITIONED
.
ALL THE PROTECTIVE AND SAFETY DEVICES MUST BE KEPT IN PER-
FECT CONDITION AND WORKING ORDER
.
02 INSTALLATION
02.01 Packaging Contents
On delivery, this Manual for the Use and Maintenance containing the Declaration of Conformity of the
product with the EC regulations, isattached to the machine and considered an integral part of it.
The machine arrives in a single package ready for use.
Take care to handle the box only manually, always keeping it in an upward position as indicated on
the box.
02.02 Connections
Before positioning the Machine, ensure that the bearing surface is a horizontal level. If the wheels are
present, insert them onto the special feet.
Once positioned, connect the machine to the electric power supply, after having;
◊
ensured that the tension and frequency of the power supply correspond to that written on the
plate;
◊
ensured that that socket is connected to earth.
◊
taken steps to have the proper plug (16 + 32A) to a 5 pole wire (3 phases, neutral and earth),
attached by specialised, capable personnel.
The Manufacturer specifies that the mains line should be equipped with safety devices by a differential
switch, co-ordinated with the general earth installation, in conformity with the local and national laws.
Check that the safety devices of the Machine are present and assembled before activating the ma-
chine.
Check also that the
auger and the knife, small wheel: if this is not the case, invert the arrangement of
the phases.
CONNECT THE MACHINE ONLY TO PARTS OF THE ELECTRICAL PLANT WHICH ARE INDIVIDUALLY PRO-
TECTED