i-Flash Technology Limited
Rm 1110, 11F, Fabrico Industrial
Buildings, 78 Kwai Cheung Road,
Kwai Chung, NT. Hong Kong
Web:
Tel:
Fax:
Email:
www.iflashtec.com
+852 2110 9587
+852 3585 5233
[email protected]
PULSE DS Mark II V Series Installation Guide
18 |
P a g e
Networking Page – Assign an IP to DSM2V
DSM2V supports IP version 4. The IP address can set automatically via DHCP, or a static IP address can
be set manually. To make DSM2V work properly, the user needs to set the DNS configuration properly.
For security purposes, the user can also assign the DSM2V an HTTP Port other than 80
IP Address Configuration
The DSM2V operates in two modes:
Dynamically Assigned via DHCP
– all the field values for the Static IP mode are not used. The DSM2V
acquires its IP address from the first DHCP server it discovers on its LAN.
Statically Configured as
– configures all of the following fields: IP address, Subnet Mask, Default
Gateway IP address, DNS Server 1 (primary), DNS Server 2 (secondary). These fields are set to zero by
default. Static IP addresses are recommended for the DSM2V
DNS Configuration
There are two methods of DNS configuration on the DSM2V:
1. The DSM2V can obtain the DNS server automatically
2. Users can configure their own preferred DNS server
