i-Flash DSM2V Series, Руководство пользователя

Страница: 30 / 32

i-Flash Technology Limited
Rm 1110, 11F, Fabrico Industrial
Buildings, 78 Kwai Cheung Road,
Kwai Chung, NT. Hong Kong
Web:
Tel:
Fax:
Email:
www.iflashtec.com
+852 2110 9587
+852 3585 5233
info@iflashtec.com
PULSE DS Mark II V Series Installation Guide
30 | P a g e
Motion Detection Page
The DSM2V supports Motion Detection. To utilize this feature, please follow the below steps:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If
something/somebody moves in the motion detection region, an alarm will be triggered.
Show Motion Detection Regions – If this option is selected, the motion detection regions will be
displayed on the screen with a white border.
To Edit a Monitored Area
1. In the Select a Region dropdown list, select the region ID.
2. Click Edit.
3. Click on the video, drag and draw you preferred area.
4. Set the Sensitivity. Click the Save button to save the sensitivity.
NOTE: The Sensitivity value varies from 0 to 100. The larger the value is, the higher the sensitivity.
5. Click Save to save the settings.
To Remove a Monitored Area
1. In the Select a Region dropdown list, select the region you would like to remove.
2. Click Remove .
3. Click Save to save the changes.