I-CAN 2100T, Руководство пользователя

Страница: 13 / 42

4 Using Your Decoder
Turning Your Decoder On / Off
Switch on the TV set and any other connected equipment. Then switch your decoder on by pressing the button on
the remote control. When you are not using your decoder, put it into standby by pressing this button again. The standby
operation mode is indicated by the red light on the front panel. When the decoder comes out of standby, the last channel
viewed appears.
Basic Rule “Point & Select”
You only need to know one rule to use your decoder. This rule is called
“Point and Select”. Once you master this rule, you can use any function
of your decoder. You “point” by pressing the arrow buttons on the remote
control or front panel. Pressing the arrow buttons moves the “on-screen”
highlight to different items on the screen. Once you have pointed to an
item on the screen, select it by pressing the button on the remote
control.
Channel Banner
Channel Banner appears at the bottom of the screen
when you tune your decoder to a new channel or when
you press the button.
It offers you basic information about individual programs
and facilitates surfing through channels and programs.
The Channel Banner disappears automatically after a
few seconds or when you press .
Note that some Channel Banner information are only
available in case of digital channels.
WWW.I-CAN.TV 7