TV Settings
The
TV Settings
screen contains the following options:
TV Screen
Format
,
Display Format
,
TV SCART Output
and
Video Standard
.
Change the
TV Screen Format
setting, if necessary. You may also
change the default
Display Format
value (Letter-box) to change the
way the video signal is transformed if the broadcast aspect ratio is
different than that of your TV.
TV SCART Output
lets you choose the
format of the video output signal for TV.
Video Standard
should be set
to the standard used in your country.
Read the descriptions that appear in the
TV Settings
screen before you
make a decision.
TV Settings
System Settings
The
System Settings
screen contains some of the configuration
parameters you may change.
Default CA System
- The Conditional Access system you use.
VCR SCART Output
- Format of the video output signal for VCR.
Dolby Digital
- If you use a Dolby Digital receiver (Home-Cinema
system), change the value of the Dolby Digital option to Yes.
Note: If you set this option to
Yes
, when the broadcast carries
Dolby Digital - no audio will be available through the TV & VCR
outputs or L/R audio outputs of the decoder. The Dolby Digital bit
stream (AC-3) will only be available via Digital Optical Out.
Auto Upgrade in Standby
- When you switch your receiver into
the standby mode, the application checks whether a new software
version is available. If the new software version is detected, you are
informed about the availability of the upgrade once you have
switched your decoder into the operate mode. However, you may
switch the Auto Upgrade option to Yes. In this case, software of the
decoder is upgraded automatically when the receiver is in the
standby mode.
Auto Upgrade in Operate
- This option allows you to upgrade your
decoder when it is in the operate mode. You can set the
Check
Time
and
Check Repeat
of the upgrades search. At the specified
time a window is shown informing you about that the search for
upgrades is about to begin. The search is initialized if you press the
button or after 1 minute. You can press
button to cancel
the search.
Check Time
– Here you can specify the time when you want your
decoder to check for upgrades.
Check Repeat
– This option allows you to choose how often you
want your decoder to repeat the check for upgrades.
Channel Numbering
– Displays information about the way the
channels are numbered. This message is for informative purpose
System Settings
Upgrade In Operate
WWW.I-CAN.TV
26
Содержание 2100T
Страница 1: ...WWW I CAN TV i ...
Страница 42: ...WWW I CAN TV 36 ...
