7
MECHANICAL REPAIR
IMPORTANT: USE ONLY ICE REPLACEMENT PARTS
WHEN SERVICING YOUR GAME. USING NON-ICE
APPROVED PARTS COULD VOID YOUR WARRANTY,
AND COULD CAUSE SERIOUS DAMAGE TO THE
GAME OR INJURY TO OTHERS.
IF YOU HAVE ANY QUESTIONS REGARDING REPAIR
AFTER READING THIS SECTION, CALL OUR SERVICE
DEPARTMENT BEFORE PROCEEDING AT:
I.C.E. SERVICE DEPARTMENT
716-759-0360
NORMAL BUSINESS HOURS ARE:
MONDAY – FRIDAY, 9:00 AM TO 6:00 PM EST
LIGHT BULB REPLACEMENT
WARNING: TURN OFF THE GAME POWER
BEFORE REPLACING LIGHT BULBS
PRIZE WHEEL LIGHTS
•
Remove the rear panel from the game. Locate the PC
Board where the light bulb is not working. Remove
the PC Board by unscrewing the white hexagon spac-
ers that secure the PC Board to the game. Replace
the light bulb. Re-attach the PC Board to the game.
•
REPLACEMENT BULB: 2005
FRONT DISPLAY LIGHT
•
Remove the rear panel from the game. Locate the PL
-L lamp and remove the clips that retains the lamp.
Press the red button by the end of the bulb that plugs
in and lift the bulb out. Replace with new bulb. Re-
place clip.
•
REPLACEMENT BULB: 8312
“BREAK THE BANK” MARQUEE LIGHTS
•
Remove the “Bank Front” cover from the game by
removing the 8 screws that attach the cover to the
game. Remove the retaining clips from the PL-L fluo-
rescent bulbs. Press the red button by the end of the
bulb that plugs in and lift the bulb out. Replace with
new bulb.
•
REPLACEMENT BULB: 8312
BANK GUARD SHADOW LIGHTS
•
Remove the rear panel from the game. Unscrew the
“Coin Art” panel and remove from game. Locate the
burned out bulb and replace.
•
REPLACEMENT BULB: 2005
SEE PHOTO ON NEXT PAGE
MAINTENANCE & TROUBLESHOOTING
PLL LAMP LOCATED
BEHIND PC BOARD
