Chapter 1 - Introduction
1-5
IBC2602 User's Guide
Both SVGA and flat panel connectors are available at the front panel
(optional flat panel connector required). The front panel SVGA connector
is an industry standard DB15. The DB15 connector is compatible with
standard desktop SVGA monitors. The front panel flat panel connector is
a 50-pin SCSI connector (AMP 786096-5 or equivalent). See the
connector specification section in Chapter 2 for the front panel connector
pinout.
Ethernet
The Intel 82559ER 10/100 Base-TX Ethernet controller drives the dual
front panel Ethernet ports. The Intel 82559ER is a 32-bit PCI device that
includes both the Media Access Controller (MAC) and the Physical Layer
Controller (PHY). The MAC supports 10 Mbps and 100 Mbps operation
compliant with the IEEE 802.3 standard. The PHY supports 10 Base-T
and 100 Base-TX compliant with the IEEE 802.3 standard.
The front panel Ethernet connectors are an industry standard 8-pin RJ45.
The connectors are available through the front plate. Two status LED's
per channel indicate speed and activity/link status.
CompactPCI Interface
The IBC2602 is electrically and mechanically compatible with the PICMG
2.0 R3.0 CompactPCI Specification, and based on the Eurocard industry
standard 6U form factor (233mm X 160mm). The IBC2602 functions in a
CompactPCI backplane with one system slot and one or more peripheral
slots. A jumper setting allows the IBC2602 to function in a system slot
without a system master CPU. This mode of operation allows for power
only" backplanes where communication over the backplane is not
required.
Hot Swap circuitry on the IBC2602 allows insertion or removal from a
powered backplane. The IBC2602, if properly configured, continues to
operate even after system master removal. When this occurs, the
IBC2602 will sense the removal of the system master and automatically
put its PCI-PCI bridge into reset. The IBC2602 uses the industry
standard Intel 21554/5 non-transparent bridge. The IBC2602 supports
either backplane VI/O voltages of 3.3V or 5V.
Super I/O
The SMC FDC37B788 Super I/O includes a real time clock,
keyboard/mouse controller, floppy disk interface, printer port, and two
serial controllers. A coin cell battery in a socket provides battery-backup
for the real time clock. The minimum battery life is 5 years.
Содержание IBC2602
