FX Level Knob
This knob is used to control the level of the signal going to the effects send mixing
bus. It is POST EQ & POST VOLUME, if the Channel Volume or the Eq is
adjusted, then the level of signal going to an effects processor will also be changed.
Volume Knob
Use this to balance the mix & level of signal going to the Master Mixing Stage and
outputs.
Bass Control
Turn knob clockwise to boost low (bass) frequencies (100Hz and below) by up to 15dB, for adding depth to recordings, or extra punch to keyboards,
sound modules, etc.
Treble Control
Turn clockwise to boost high (treble) frequencies (10kHz and above) by up to 15dB, to add crispness and brightness to tracks. Beware if you have a
poor signal source then the use of too much treble will increase the noise level.
Master Controls
Monitor Volume Control
This knob is used to control the level of the signal going to the Monitor Output jack
at the back of the mixer, and can also be used as a ‘mono sum’ output. It has been
designed for monitor (foldback) for the artist or user to hear exactly what is
happening ‘on stage’, as in most applications they are situated behind the sound
system.
Master Volume Control
Does exactly what is says on the tin - it controls the overall Left & Right Output
Levels of the Qmix.
