UNPACKING
Although the Q – Mix has been designed as a rugged piece of professional equipment, it is quite heavy for its size. It contains a high specification
modern electronic PCB assembly and should be treated with care.
The packaging of the unit is specifically designed to safely transport this product. In the unlikely event of the product requiring servicing, this
packaging is the safest way to transport it.
All units are factory set for 220-230v operation. Units factory made for 110/120V supply are clearly marked on the back and should not be
connected to any higher voltage power source.
FITTING A POWER LEAD PLUG
The wires in the IEC/CEE mains lead are coloured: Earth: Green/Yellow Neutral: Blue Live: Brown
MOUNTING THE UNIT
This unit has been designed for rack mounting use, in a Racking enclosure made to BS5954, IEC297 or Din 41494 standards.
It must be mounted in the horizontal position with clear cool air flow of 5cm around the side air vents.
DO NOT USE RACKS NEAR HEATING DUCT OUTLETS, APPLIANCES OR RADIATORS.
Care is required when installing these units in a rack. It is advisable to put the Rack on its back, then place all the other equipment being fitted
to the rack into it before tightening the retaining screws.
Contents:
1. OVERVIEW
2. USING
THE
Q-MIX
3. SPECIAL
FEATURES
4. REAR
CONNECTIONS
5. TROUBLE
SHOOTING
