Hyundai WS 2494, Инструкция по эксплуатации

Страница: 26 / 48

EN - 26
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note: Transmissions between receiver and transmitter can reach up to 30m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc.
6. THERMOMETER
6.1 RF Transmission Procedure:
• The main unit automatically starts receiving transmission from outdoor thermo sensor for
outdoor temperature after batteries inserted.
• The outdoor sensor will automatically transmit temperature signal to the main unit after
batteries inserted.
• If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after
the batteries inserted (“- - . –”display on the LCD), hold “SEARCH” button (B5) for 3 seconds
to receive transmission manually. RF icon “ ” flashes on the LCD.
6.2 Temperature
(1) Daily Highest/ Lowest Outdoor & Indoor Temperature
• After start up, the unit automatically shows daily 24 hours highest & lowest indoor & outdoor
temperature record. “HI” & “Lo” show on the LCD.
(2) Recorded Maximum/Minimum Temperature from Start-up/Reset.
• Press “MEMORY” button (B3) to view the maximum and minimum temperature record from
start-up or reset. “MAX” &”MIN” display on the LCD.
• When viewing the memory record, hold “MEMORY” button (B3) for 3 seconds to clear the
maximum and minimum record.
• When viewing the memory record, press “MEMORY” button (B3) again to check the
corresponded time and date for memory maximum and minimum temperature record. The
memory record value and corresponded time and date flash. Press “MEMORY” button select
to view:
Time & date for minimum outdoor temperature record, Time & date for maximum outdoor
memory record, Time and date for minimum indoor temperature memory record, Time and date
for maximum indoor temperature 01memory record.
(3) Outdoor Temperature Alert Function
• Press “ALERT” button (B7) to select to activate or deactivate outdoor temperature alert
function.
• Press ALERT button select to:
→ Active outdoor upper temperature alert, the icon “ ” besides outdoor temperature digit
would display.
→ Active outdoor lower temperature alert, the icon “ ” besides outdoor temperature digit
would display.
→ Active outdoor upper & lower temperature alert, the icon “ ” besides outdoor temperature
digit would display.
→ Deactivate outdoor temperature alert, alert icon disappear.
• Hold “ALERT” button (B7) for 3 seconds to enter outdoor temperature alert setting. Icon “
“ or “ ” beside Temperature’s digits flash. Press “▲” or “▼“button to adjust the setting
value, press “MODE” (B1) to confirm the setting. Setting Sequence as follow: Upper limit of
temperature, Lower limit of Temperature.