Hyundai TRC 817 ADR3, Инструкция по эксплуатации

Страница: 70 / 92

ENG - 70
POWER SUPPLy
AC POWER OPERATION
Before operating the unit for the first time
or operating the unit in a new area, it is
essential to assure that the setting of
(VOLTAGE SELECTOR) corresponds with
the local voltage. To adjust the voltage, set
(VOLTAGE SELECTOR) to the local volta -
ge with a screw driver.
Connect one end of the mains lead to the
(AC ~IN) socket and the other end to an
AC outlet.
The unit is not disconnected from the mains
unless the mains lead is unplugged from the
AC outlet.
CAUTION:
To prevent battery electrolyte leakage, which
may result in injury and damage to the unit or
other objects, observe the following precauti -
ons:
All batteries must be installed with the
roper polarity (see diagram in the compart -
ment of the unit)
Do not mix new with old or used batteries.
Only use batteries of the same type and
brand.
Remove the batteries when they are not to
be used for a long period time.
1)
2)
1)
2)
3)
4)
Battery power operation
Open the battery compartment lid by
pushing down on the tabs.
Install 8 x „C“ size batteries (not supplied).
Refer to the polarity diagram in the batte -
ry compartment of the unit. Match the (+)
and(- ) marks on t he diagram to the (+)
and (-) marks on the batteries.
3) Replace the lid.
1)
2)