EN - 28
TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair.
Do not open the set as there is a risk of electric shock.
If you are unable to remedy a problem by following these hints, consult your dealer or service cen
-
ter.
WARNING:
Under no circumstances should you try to repair the set yourself, as this will invalidate
the warranty.
- Problem
• Solution
No sound / power
- Volume not adjusted
• Adjust the VOLUME
– Power cord not securely connected
• Connect the AC power cord properly
– Batteries dead / incorrectly inserted
• Insert (fresh) batteries correctly
Display does not function properly / No reaction to operation of any of the controls
– Electrostatic discharge
• Switch off unplug the set. Reconnect after a few seconds
No disc indication
- No CD inserted
• Insert a CD, CD-R or CD-RW
– CD badly scratched or dirty
• Replace / clean CD, see maintenance
– Laser lens steaned up
• Wait until has cleared
- CD-R is blank or the disc is not finalized
• Use a finalize CD-R
CD / Mp3 disc playback does not work
– CD badly scratched / dirty
• Replace / clean CD (see maintenance)
– Laser lens steamed up
• Wait until lens has adjusted to room temperature
The CD skips tracks
– CD damaged or dirty
• Replace or clean CD
– Program is active
• Quit Program mode (s)
Содержание TRC 568
Страница 30: ...Poznámky Notes Notatky ...
Страница 31: ...Poznámky Notes Notatky ...
Страница 32: ...Seoul Korea ...