Hyundai TRC 568, Руководство пользователя

Страница: 25 / 32

EN - 25
EN
CONTROLS
Top and front panels (See 1.
1. VOLUME
-adjusts volume level.
2. STEREO HEADPNONE JACK
- 3.5mm headphone jack.
3. INTRO Continuously plays first 10 seconds
of every track.
4. PROG. CD/Mp3
- programs and reviews programmed track
numbers.
5. REPEAT
- repeats a track/ CD/ program.
6. CD DOOR
- open or close the CD door
7. HANDLE
- carrying the device.
8. TELESCOPIC ANTENNA
- to improve FM reception
9. DISPLAY
- shows the CD functions.
10. SEARCH

/

CDMP3: - skips or searches a passage /
previous track.
11. SEARCH

/

CD/MP3: - skips or searches a passage /
track forward.
12. PRESS TO PLAY/ PAUSE
- starts or pauses CD/MP3 play.
13. STOP
-stops CD/MP3 playback; erases a pro-
gram .
14. TUNING CONTROL
- select the AM/FM station.
15. UNCTION SELECTOR
- selects the function CD/MP3, OFF
or FM,AM
16. DIAL POINTER WINDOW
- show AM/FM dial frequency.
17. SPEAKER
- enhances bass response.
18. BATTERY DOOR
-battery compartment, for DC12V
(LR-14x8).
POWER SUPPLY
Power Supply
Whenever convenient, use the power supply
if you want to conserve battery life. Make sure
you remove the plug from the set and wall
outlet before inserting batteries.
Batteries ( not included) open the battery com -
partment and insert eight batteries, type LR-
14,UM-2 or C-cells, (preferably alkaline) with
the correct polarity as indicated by the “ + “and
“-“. symbols inside the compartment.
Batteries contain chemical substances, so they
should be disposed of properly. Incorrect use of
batteries can cause electrolyte leakage and will
corrode the compartment or cause the batteries
to burst. Therefore:
• Do not mix battery types: e.g. alkaline with
carbonzinc. Only use batteries of the same
type for the set.
• When inserting new batteries, do not try to
mix old batteries with the new ones.
• Remove the batteries if the set is not to be
used for a long time.
Using AC Power
1. Check if the power voltage, as shown
on the type plate located on the bottom
of the set, corresponds to your local AC
power supply. If it does not, consult your
dealer or service centre.
2. Connect the power cord to the AC MAINS
inlet and the wall outlet. The power supply
is now connected and ready for use.
3. To switch off completely, unplug the
power cord from the wall outlet. Unplug
the power cord from the wall outlet to
protect your set during heavy thunders-
torms.