07
7-147
OTM070221L
Remote Smart Parking Assist standby
When ‘Parking Assist Conditions Not
Met’ message appears, when Parking/
View (
) button has been pressed and
held, Remote Smart Parking Assist is in
standby. After a while, press and hold the
Parking/View (
) button again to see if
Remote Smart Parking Assist works.
The message appears even when the
smart key's battery is low. Check the
smart key battery level.
Limitations of Remote Smart Parking
Assist
In the following circumstances, Remote
Smart Parking Assist performance to
park or exit the vehicle may be limited,
there may be a risk of collision, or
Remote Smart Parking Assist may turn
off. Park or exit the vehicle manually if
necessary.
•
An object is attached to the steering
wheel
•
The vehicle is installed with a snow
chain, spare tire or different size
wheel
•
Tire pressure is lower or higher than
the standard tire pressure
•
Your vehicle is loaded with cargo
longer or wider than your vehicle or a
trailer is connected to your vehicle
•
There is a problem with the wheel
alignment
•
Your vehicle is leaned severely to one
side
•
Your vehicle is equipped with a trailer
hitch
•
The license plate is installed
differently from the original location
•
There is a person, animal or object
above or below the ultrasonic sensor
when Remote Smart Parking Assist is
activated
•
The parking space is curved or
diagonal
•
There is an obstacle such as a person,
animal or object (trash can, bicycle,
motorcycle, shopping cart, narrow
pillar etc.) near the parking space
Содержание Santa Fe 2022
Страница 262: ...Convenience Features 5 52 HomeLink 5 Programing Flow Chart OOS040475N...
Страница 667: ...I Index...