Driver assistance system
7-114
•
Rear Cross-Traffic Collision-Avoidance
Assist will operate when all the
following conditions are satisfied:
- The gear is shifted to R (Reverse)
- Vehicle speed is below 5 mph (8
km/h)
- The approaching vehicle is within
approximately 5 ft (1.5 m) from the
left and right side of your vehicle
- The speed of the vehicle
approaching from the left and right
is above 3 mph (5 km/h)
•
Emergency braking will be assisted
to help prevent collision with
approaching vehicles from the left
and right.
WARNING
Brake control will end when:
-
The approaching vehicle is out of the
detecting range
-
The approaching vehicle passes
behind your vehicle
-
The approaching vehicle does not
drive toward your vehicle
-
The approaching vehicle speed slows
down
-
The driver depresses the brake pedal
with sufficient power
OTM070169L
Stopping vehicle and ending brake control
•
When the vehicle is stopped due
to emergency braking, the ‘Drive
carefully’ warning message will
appear on the cluster.
•
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
•
Brake control will end after the vehicle
is stopped by emergency braking for
approximately 2 seconds.
•
During emergency braking, braking
control by Rear Cross-Traffic Collision-
Avoidance Assist will automatically
cancel when the driver excessively
depresses the brake pedal.
Содержание Santa Fe 2022
Страница 262: ...Convenience Features 5 52 HomeLink 5 Programing Flow Chart OOS040475N...
Страница 667: ...I Index...