Convenience Features
5-72
Resetting the power liftgate
OTMPH051009N
If the battery has been discharged or
disconnected, or if the power liftgate
fuse has been replaced or removed, reset
the power liftgate by performing the
following procedure:
1. Put the gear in P (Park).
2. Press the power liftgate inner button
(B) and the power liftgate handle
switch (A) simultaneously for more
than 3 seconds. The chime will sound.
3. Close the liftgate manually.
If the power liftgate does not work
properly after the above procedure,
system is checked by an authorized
HYUNDAI dealer.
Information
•
If the power liftgate does not operate
normally, check again if the gear
position is in right position.
•
If the liftgate is stopped before the
liftgate is fully open, resetting will not
proceed. Wait until the liftgate is fully
open.
WARNING
OTMPH051005N
Do not hold on to or try to pull on
the liftgate strut. Be aware that the
deformation of the liftgate strut may
cause vehicle damage and risk of injury.
Setting the power liftgate
Power liftgate opening speed
To adjust the power liftgate opening
speed, go to User Settings mode and
select ‘Door → Power liftgate Opening
Speed → Fast/Normal’ on the LCD display.
- If power liftgate function turns off,
you can not adjust the power liftgate
speed.
- Initial speed of Power liftgate is set as
“Fast”.
Содержание Santa Fe 2022
Страница 262: ...Convenience Features 5 52 HomeLink 5 Programing Flow Chart OOS040475N...
Страница 667: ...I Index...