Hyundai RTCP 991 SU RIP, Инструкция по эксплуатации

Страница: 60 / 72

EN - 60
ADJUSTMENTS
ANTI-SKATING CONTROL
-
SET THE ANTI-SKATING CONTROL (29) TO THE POSITION WHICH CORRESPONDING
TO THE ADJUSTED STYLUS WORKING PRESSURE. IF THE WORKING PRESSURE IS
2 GRAMS, THE ANTI-SKATING CONTROL ALSO TO BE SET AT 2.
PLATTER SPEED ALIGNMENT
-
DURING PLAYBACK OF RECORD, OBSERVE THE APPROPIATE STRIP OF STOBE
CALIBRATION DOTS FROM THE STROBE LENS. THE UPPER ONE IS FOR 33 RPM
AND THE MIDDLE ONE IS FOR 45 RPM.
-
IF THE STROBE DOTS APPEAR TO FLOWING TO THE RIGHT, IT MEANS THE PLATTER
IS REVOLVING SLOWER THEN RATED SPEED. TURN THE PITCH CONTROL (33) TO
THE “ + “ DIRECTION. IF THE STROBE DOTS APPEAR TO FLOWING TO THE LEFT, IT
MEANS THE PLATTER IS REVOLVING FASTER THAN RATED SPEED. TURN THE PITCH
CONTROL (33) TO THE “ – “ DIRECTION.
-
ADJUST THE PITCH CONTROL (33) UNTIL THE STROBE DOTS DO APPEAR TO BE
STATIONARY WITHOUT MOVING LEFT OR RIGHT.
TONE ARM STOPPING POSITION ALIGNMENT
-
THE POSITION OF THE TONE ARM COMPLETE PLAYBACK AND RETURN TO THE REST
STATION CAN BE ADJUSTED AT THE ALIGNMENT SCREW (27) AS FOLLOW:-
-
BEFORE STARTING THE ALIGNMENT, PLEASE TAKE OUT THE HOLE COVERING
RUBBER:-
A) IF THE SYSTEM CANNOT COMPLETE THE PLAYBACK OF RECORD AND RETURN
EARLIER
1) USE A CROSS HEAD SCREW DRIVER AND TURNING THE ALIGNMENT SCREW (34)
INSIDE THE HOLE CLOCKWISE, THE STOPPING AND EJECT POSITION OF THE TONE
ARM WILL MOVE MORE INWARD TO THE CENTER OF THE RECORD BEFORE
PLAYBACK COMPLETION.
B) IF THE SYSTEM CANNOT RETURN TO REST POSITION AUTOMATICALLY AFTER
PLAYBACK OF RECORD
2) USE A CROSS HEAD SCREW DRIVER AND TURNING THE ALIGNMENT SCREW (34)
INSIDE THE HOLE ANTI-CLOCKWISE, THE STOPPING AND EJECT POSITION OF
THE TONE ARM WILL MOVE MORE AWAY FROM THE CENTER OF THE RECORD
BEFORE PLAYBACK COMPLETION.