Hyundai RTCP 991 SU RIP, Инструкция по эксплуатации

Страница: 56 / 72

EN - 56
A) CD ENCODING
I) ECNODING 1 TRACK / 1 DISC
1) PERFORM NORMAL PLAYBACK OF THE CD TRACK YOU WANT TO ENCODE
& RECORD,
2) PRESS “
REC
“ BUTTON (15) DURING THE PLAYBACK OF THE DESIRE TRACK
AND THE SYSTEM WILL START ENCODING.
3) THE SYSTEM WILL SHOW “ ” & “ “ AND FLASHING.
ENCODING IS PERFORMING NOW.
4) PRESS THE “ REC “ BUTTON (15) REPEATLY AGAIN TO SELECT RECORD 1 TRACK “
REC_ONE “ OR RECORD ONE ENTIRE DISC “ REC_ALL “.
5) AFTER COMPLETING OF RECRODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
II) ENCODING BY PROGRAM
1) PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE
THE CO TRAY.
2) SELECT THE DESIRE TRACKS BY FOLLOWING “ CD DISC PROGRAMMING “
PROCEDURES. THEN PRESS “ CD PLAY/PAUSE “ BUTTON (17) TO START PLAYBACK.
3) PRESS THE “ REC “ BUTTON (15) AND THE UNIT WILL DISPLAY “ ” & “ “
AND FLASHING. ENCODING IS NOW PERFORMING.
4) PRESS THE “ REC “ BUTTON (15) REPEATLY AGAIN TO SELECT “ REC_ALL “.
5) AFTER COMPLETED OF ENCODING ACCORDING TO THE PRESET PROGRAM,
UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:
-
SAME OPERATION PROCEDURE FOR ENCODING TO SD/MMC CARD.
-
IF BOTH RECRODING SOURCE (USB PEN DRIVE AND SD/MMC CARD) BEING
DETECTED BY THE SYSTEM DURING ENCODING, PLEASE PRESS “SKIP UP
OR DOWN ” BUTTON (18/20) TO SELECT THE DESIRE SOURCE. THEN PRESS
“ REC “ BUTTON (15) AGAIN TO CONTINUOUS THE PROCESS.
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME
OF THE CD TRACK
-
THE SYSTEM WILL CREAT A “ AUDIO “ FOLDER AND THEN STORE THE ENCODING
TRACK IN IT.
-
THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS, SAMPLING
RATE : 44.1KHZ
-
NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
-
TO INTERRUPT THE RECRODING, PRESS THE “ STOP “ BUTTON (19) DURING
RECORDING MODE.
-
RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED,
IF TERMINATE THE ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK
BEING RECORDED NOR STORED TO THE USB OR SD/MMC CARD
III) COPYING OF MP3/WMA FILE
IF PUTTING A MP3/WMA DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY
THE FILES TO THE USB OR SD/MMC CARD IF PRESS THE “ REC “ BUTTON (15).
THE OPERATION PROCEDURES IS SAME AS CD ENCODING AS STIPULATE ON ABOVE,
AND THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3/WMA FILE BEING
READ.