Hyundai RTCP 991 SU RIP, Инструкция по эксплуатации

Страница: 51 / 72

EN
EN - 51
-
THE PRE-SET TIME WILL BE RE-SET COMPLETELY IF DIS-CONNECTING THE MAIN
POWER SUPPLY. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY
MODE FOR CONVENIENCE USAGE.
LISTENING TO RADIO
MANUAL TUNING
1) PRESS FUNCTION BUTTON (12) TO SELECT “ TUNER ” MODE.
2) PRESS “BAND / ” BUTTON (17) TO SELECT DESIRED BAND (MW OR FM).
3) TUNE TO THE REQUIRED STATION BY PRESSING THE “ TUNING / SKIP UP
OR DOWN (18/20) BUTTON.
4) ADJUST VOLUME CONTROL (23) TO THE DESIRED VOLUME LEVEL.
AUTO TUNING
1) PRESS FUNCTION BUTTON (12) TO SELECT “ TUNER “ MODE
2) PRESS “ BAND / ” BUTTON (17) AND SELECT THE DESIRED BAND (MW (AM)
OR FM).
3) PRESS AND HOLD THE “ SKIP / TUNING UP OR DOWN (18/20) BUTTON
FOR 1-2 SECONDS AND THEN RELEASE
4) THE UNIT WILL START SEEKING AUTOMATICALLY AND STOP UNTIL A RADIO
STATION IS REACHED.
5) REPEAT STEP 3 & 4 UNTIL THE DESIRED RADIO STATION IS BEING REACHED.
6) ADJUST VOLUME UP/DOWN CONTROLS (23) TO THE DESIRED VOLUME LEVEL.
PRESET STATIONS
YOU CAN STORE UP TO TOTAL OF 40 RADIO STATIONS (30 FM,10 AM) IN THE MEMORY.
1) SET TO “ TUNER “ MODE
2) TURN TO THE DESIRED RADIO STATION BY “ MANUAL” OR “AUTO” TUNING METHOD.
3) PRESS “ MEM / CLK-ADJ” BUTTON (13) TO ENABLE PROGRAM STATE.
4) PRESS “ FOLDER / PRE-UP (14) OR FOLDER / PRE-DOWN BUTTON (AT REMOTE
HANDSET) TO SELECT THE DESIRED STATION MEMORY POSITION FOR STORAGE.
5) PRESS “MEM / CLK-ADJ ” BUTTON (13) AGAIN TO CONFIRM THE SETTING.
6) REPEAT STEP 2 TO 5 TO STORE OTHER STATIONS.
7) PRESS “ FOLDER / PRE-UP OR DOWN “ BUTTON AT REMOTE HANDSET TO
SELECT THE PRESET STATIONS IN ORDER.
8) TO RETURN NORMAL TUNER MODE, LEAVE KEYS FREE.
-
THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING
OFF THE MAIN POWER BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH
THE SYSTEM INTO STANDBY MODE FOR CONVENIENCE USAGE.
-
YOU CAN OVERWRITE A PRESET STATION BY STORING ANOTHER FREQUENCY
IN ITS PLACE.
FM & FM-STEREO RECEPTION
• PRESS THE “ FM-ST/MONO ” BUTTON (21)REPEATEDLY, THE FM PROGRAMS
ARE RECEIVING IN MONO AND STEREO MODE REPEATEDLY. IN PARTICULAR WHEN
STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE PROGRAM
IN MONO.
• IF STEREO SIGNAL IS BEING RECEIVED, THE “ST” INDICATOR “ ” WILL APPEAR
ON LCD DISPLAY (2) TO SHOW FM STEREO PROGRAM IS NOW RECEIVING.