Hyundai RTCC632SURIP, Инструкция по эксплуатации

Страница: 53 / 68

ENG
ENG - 53
FOR CD/MP3 DISC
(4) random PLAy (1 disc) (3) repeat (1 disc)
(5) OFF mode (1) repeat (1 track) (2) opakovať (1 disk)
PLAy mode ON LCD display
repeat (1 track)
repeat (1 disc) all
repeat (1 disc) + random ran + all
random (1 disc) ran
OFF mode --------------
repeat PLAy
you can listen the desired tracks or folder repeatedly by this FUNCTION.
random PLAy
you can listen all the tracks or folder in a random order by this FUNCTION
CD/MP3 disc programming
Up to 40 tacks can be programmed for disc PLAy in any order. before use, be sure to press the“
STOP
<
/ BAND button (8)
Set in CD mode & STOP the CD playback.
Press the “ memory button (9) , “ mem “ will appear ON LCD display (2) & flashing. moreo -
ver, it will indicate program no. and digits for track no. to be programmed.
select a desired track by pressing skip up
:
or down
9
buttons (26,12)
(for MP3 disc, press“ pre-up
5
(27) or “pre-down
6
(13) button to select the desire folder).
Press the “ memory ” button (9) to store the trace into memory.
Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
when all the desired tracks have been programmed, press “ PLAy/PAUSE
4;
“ button (22)
to PLAy the disc in assigned order.
press “ STOP
<
/ BAND ” button (8) to terminate program PLAy. press again “ STOP
<
BAND ” button (8) to clear all memory & the indicator “ mem “ disappear from LCD display
(2)
After program complete, press “ skip up
:
or down
9
buttons (26,12) to review the tracks
being programmed. press “ CD STOP “ button (20) to exit review mode.
The programming FUNCTION allow to progrm 1 entire disc only.
•
•
1)
2)
3)
4)
5)
6)
7)
•
•