ENG
ENG - 51
PHONO
noted:
remove the stylus protector.
be sure that the tone arm is being detached from the tone arm rest before
operating and re-secured again afterwards.
select to “ PHONO ” mode from FUNCTION selector (10)
set the speed selector (32) to the proper position depending ON the type of
RECORD to be played.
place the RECORD ON the platter (use the spindle adaptor (31) if
required).
lift the tone arm from the rest (33) and slowly move it to the RECORD side.
the platter will start to rotate.
place the tone arm to the desired position of the RECORD.
adjust the volume up/down button (3) to the desired level.
at the end of RECORD, the platter will automatically STOP rotating. lift the tone arm from
the RECORD and return it to the rest position (33).
to STOP manually, lift up the tone arm from the RECORD and return it to the rest (33).
Remark:
as some kind of RECORD the auto-STOP area was out of the unit setting, so it will
STOP before the last track finish. in this case, select the auto-STOP switch (35) to “ OFF “ posi
-
tion, then it will run to the end of the RECORD but will not STOP automatically (turn OFF the
unit by power button or switch back the auto-STOP switch (35) to “ ON “ position to STOP the
platter rotate). then put back the tone arm to the rest position (33).
PLAyING COMPACT DISC
getting start
select “ CD ” mode from FUNCTION selector (10)
press “OPEN/close” button (25) to OPEN the CD door.
place a CD with the printed side facing up inside the tray.
press the „ “ button (23) to turning the CD tray, and loading out the other disc comparment.
press the “OPEN/close” button (25) to close the CD door after placing all discs inside.
CD search is performing, the LCD disply (2) will show the total number of disc, number of
tracks & playing time of disc.
Noted:
CD searching will be performaed everytime when switching to CD mode or closing the
CD door. all CD functions will be responsed only after the CD reading is completed.
PLAy / PAUSE mode
4;
System will start playbck automatically or press the “ PLAy/PAUSE
4;
button (22) to
start playback, the first track of the first disc will be played and the playback information will
appear ON the LCD display (2).
Or press either the “ disc 1 ” , “ disc 2 ” , “ disc 3 ” button (24), unit will PLAy the disc inside
the desire tray directly.
To interrupt, press the “ PLAy/PAUSE
4;
“ button (22) once and the information ON LCD
display (2) will start flashing. press again to release & resume normal playback.
Remark:
the CD tray will OPEN if press “ CD door “ OPEN button (25) during playabck. this
allow to change/take out the other two cds without interrupt the music playback.
-
-
1)
2)
3)
4)
5)
6)
7)
8)
•
1)
2)
3)
4)
5)
6)
•
1)
2)
3)
Содержание RTCC632SURIP
Страница 62: ...Poznámky Notatka Notes ...
Страница 67: ...Poznámky Notatka Notes ...
Страница 68: ......
