Hyundai RTCC 636 SURIP, Инструкция по эксплуатации

Страница: 60 / 88

EN - 60
REMOVING OF USB / MEMORY CARD
To remove the USB / memory card, turn off the power or switch the function mode to either CD,
or tuner
fi rst. For USB port – un-plug it by pulling out the USB socket directly, for memory card –
pull out the SD/MMC card straightly without bending.
LISTING TO TAPE
GENERAL OPERATION
Stop / eject key press to stop all deck operation. Press again to open the cassette door.
Fast forward key & press to start rapid tape winding in either forward or revers
Fast rewind key direction. Press stop / fast rewind key eject keys when the cassette
spools stop turning.
Play key press to start playing tape.
Pause key press to stop tape operation temporarily. Press again to resume play.
Record key press together with play key to start tape recording.
(deck 1 only)
PLAYBACK
● Select “ Tape ” mode from Function selector (10)
● Put in the cassette tape.
● Press play key to active playback
● Adjust the Volume up/down control (3) to the desired level.
● Use pause key when you want to stop playback temporarily.
● Press stop / eject key when finished.
Notes:
It is possible to play a cassette in both cassette players, one after the other. If you press the
“play” button at deck 2 and then press “pause” and “play” buttons together at deck 1. the tape in
deck 1 will start player automatically after the tape in deck 2 has
fi nished playing.
RECORDING
A. Recording from tape (deck 2 to deck 1)
This unit enables you to duplicate a pre-recorded tape to another tape. It is performed only one
way from deck 2 (playback) to deck 1 (recording).
Dubbing at normal speed
● Select “ Tape ” mode from Function selector (10) and then set the dubbing button (6) at “ nor.
“ position
● Inset a pre-recorded cassette into deck 2 and a blank cassette tape into deck 1.
● Press the “ Pause ” key and then press the “ Record ” and “ Play ” key at deck 1.
● Press the “ Play ” key to start playback at deck 2 & then release “ Pause ” key at deck 1 to
start dubbing.
● Press “ Pause ” key at deck 1 & “ stop ” key at deck 2 when finish.
Dubbing at high speed
This unit is quipped with a high speed dubbing system which can save the time for dubbing by
2/3 when compare to normal speed.
● Press the Dubbing button (6) to “ hi “ position and then follow the same procedures as
stipulated in “dubbing at normal speed”.