Hyundai RTCC 636 SURIP, Инструкция по эксплуатации

Страница: 58 / 88

EN - 58
PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
The system is able to decode and playback all MP3 fi le which stored in the memory media with
USB connecting port, multi- media card (MMC) or secure digital (SD) memory card
1. Press function button (10) repeatedly to select “
USB ” or “ SD card “ mode.
2. Plug-in the USB pen-drive with the face up & make
sure it going into completely or insert the memory
card in the direction of the symbol which next to the
SD card slot. Insert straight without bending.
● Connecting the USB / memory card upside down
or backwards could damage the audio system or
the storage media (USB / memory card). Check to
be sure the direction is correct before connection.
3. The system will start reading the storage media automatically after connecting, and
LCD display (2) will show the total number of MP3 files and total number of album being
detected.
4. Repeat the same playback procedure as playing CD/MP3 disc as above
Remark
- The system can detect and read the file under MP3 format only though the USB port/memory
card slot.
- If connect the system to MP3 player via the USB socket, due to variances in MP3
encoding format, some MP3 player may not be able to play via the USB socket. This is
not the malfunction of the system.
- USB port does not support connection with USB extension cable and is not designed
for communication with computer directly.
ENCODING OF CD FILE INTO MP3 FILE
The system is able to encode normal cd/phone/tape to MP3 format and recording at memory
media with USB connecting port, multi- media card (mmc) or secure digital (SD) memory card.
A) CD ENCODING
I) Encoding 1 track or entire disc
- Perform normal playback of the CD track you want to encode & record,
- Press “ Rec “ button (14) during the playback of the desire track, unit will display “ USB “ or
“ card “ & flashing. (if both source are ready during recording). Then press “ skip up ” or “
down “ buttons (26,12) to select and then press “ Rec “ button (14) to confirm.
- The system will show “USB ” or “card” & “ “ and flashing. Encoding is performing now.
- Press “ Rec “ button (14) to select record 1 track or all track during encode mode, display
will show “REC ONE” or “REC ALL” respectively.
- Press “ Stop ” button (8) to terminate the recording.
Remark:-
- The recording speed is 1:1 and according to the actual plying time of the cd track
- The system will create a “ audio “ folder and then store the encoding track in it.
- The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- No song title/album name/artist name will be recorded during encoding mode
- To interrupt the recording, press the “ Stop ” button (8) during record mode.