Hyundai RTCC 636 SURIP, Инструкция по эксплуатации

Страница: 56 / 88

EN - 56
● Play / pause mode
1. System will start playback automatically or press the “ Play/pause ” button (22) to start
playback, the first track of the first disc will be played and the playback information will
appear on the LCD display (2).
2. Or press either the “ disc 1 ” , “ disc 2 ” , “ disc 3 ” button (24), unit will play the disc inside
the desire tray directly.
3. To interrupt, press the “ Play/pause ” button (22) once and the information on LCD
display (2) will start flashing. Press again to release & resume normal playback.
Remark : The CD tray will open if press “ CD door “ open button (25) during playback. This
allow to change/take out the other two CDs without interrupt the music playback.
● Stop mode
If “ Stop ” button (8) is pressed during play or pause mode, system will go to stop mode.
● Skip mode (skip up /skip down )
1. During play or pause mode, if “ Skip up ” button (26) is pressed it will go to next track and
display the track no. and then remain the play or pause mode.
2. During play or pause mode, if “ Skip down ” button (12) is pressed. It will go back to the
beginning of the track, original track no. is display and remain the play or pause mode.
3. After step 2, press “ Skip down ” button (12) again, it will go to the previous track and
remain the play or pause mode.
● Search mode (search up /search down )
1. During play mode, if “ Skip up ” button (26) is pressed & hold for few seconds, it will start
searching forward.
2. During play mode, if “ Skip down ” button (12) is pressed & hold for few seconds. It will
star searching backwards.
● For MP3 disc
1. After focus search is performing, the total number of track and folder will be shown on the
LCD display (2).
2. Press “ Pre-up “ (27) or “pre-down “ (13) button to select the folder number.
3. Press “ Skip up
“ (26) or skip down (12) button to select the track number.
4. When the desired track and folder is being selected, press the “ Play/pause ” button (22)
to start playback.
ID3 (TRACK TITLE/ALBUM/ARTIST) FUNCTION (BY REMOTE HANDSET)
Press the “ Display “ button repeatedly during playback of MP3 disc, the song title / album name
/ artist name is being displayed in order. The LCD display (2) will resume to normal playback
information if leave key free.
Remark:-
- in that case of no name had been assigned for the track, “ no title “ or “ no album “ or “ no
artist “is being displayed” on display (2).
- No title/album name can be recognized if the input format on the disc/memory card is not
supporting by the system
- The system support only English and Arabic number for ID3 function
MP3 track format requirement:-
- Bit rate : 32 kbps~320kbps, sampling rate : 32kHz, 44.1kHz and 48 kHz decodable