manualshive.com logo in svg

Hyundai Robex 22-7, Руководство по обслуживанию

Поделиться
Скачать
Hyundai Robex 22-7 Скачать руководство пользователя страница 91

13-3-5 Handling the rubber crawler

1. Do not run over or turn on a sharp edge

If you run over or turn on a projecting sharp edge or a stepped grade, the machine will
partially load on the rubber crawler and split it or cut the threads of the rubber crawler and
the inner steel cord.

2. Prevent foreign matter from entering the rubber crawler

Foreign matter will strain the crawler and cut it.

3. No sharp turns

Do not turn sharply on a road with a high-friction factor (such as a concrete road).

4. Keep oil products away from the rubber crawler

If you spill fuel or hydraulic fluid on the rubber crawler, clean it promptly.

5. Protect from salt

Do not operate on beach (Core metal will rust due to salt corrosion).

6. Store indoors

If the machine is not used for a long time, keep it indoors to prevent exposure to direct
sunlight and rain.

13-7

Содержание Robex 22-7

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды