Hyundai PDP 608U DVBT, Инструкция по эксплуатации

Страница: 85 / 96

ENG
ENG - 85
The setup menu system - ATV PART
Press SOURCE button to select ATV MODE.
Press MENU to display options as follows.
Press ▼ DOWN button to select AUTO SEARCH, Press ► Right button to start auto
search.
Press UP ▲ and DOWN ▼ button to select MANUAL SEARCH, Press ► Right or ◄ Left
button to start manual search.
NOTE:
Auto Search always start from program number 0.
If the indication frequency stopped for a while during searching, it means a new channel
found and it will be saved, If weak signal received, the channel may be skipped and it will
not save.
When Auto Search or Manual Search, you can press SETUP button to stop Auto Search or
Manual Search.
C. Press UP ▲ and DOWN ▼ button to select FINE tune, Press ◄ Left and ► Right button to
fine Tune the frequency.
NOTE: Press ◄ Left or ► Right button once, the central frequency of the selected channel
will decrease or increase 50kHz.
D. Press UP ▲ and DOWN ▼ button to select POSITION, the current channel number and
channel frequency will be displayed at the bottom of the menu. Press Left or Right button to
view the previous or next channel.
E. Press UP ▲ and DOWN ▼ button to select SWAP, you can change the channel position
here.Set the channel number with Left/Right buttons, press DOWN button and confirm with
Right.
F. Press UP ▲ and DOWN ▼ button to select S-SYS, you can change the audio system I, DK,
BG.
1)
2)
A.
B.
1)
2)
3)