Hyundai MSD 761 DRSU, Инструкция по эксплуатации

Страница: 80 / 112

ENG - 80
CD RIPPING:
CD ripping is a process of copying audio from a CD/HDCD disc and saving the audio content
into the compressed digital audio format MP3.
With this function, you can copy the tracks of a CD/HDCD disc to the connected USB drive.
Place a CD or HDCD disc in the disc tray and insert a USB drive into the player.
Press [RIPPING] on the remote control to display the CD Ripping menu.
Use the direction keys to navigate the cursor in the menu.
In the Track window, all the tracks of the disc and their playback time are listed. Highlight
the track that you want to copy to the connected storage device, then press [ENTER] to make
selection; highlight it again and press [ENTER] to cancel the selection. Highlight Select all
and press [ENTER] to select all the tracks in the disc. Highlight Select none and press [ENTER]
to cancel all the selection of tracks. In the Summary window, you can check the information
of the number of the selected tracks and the total playback time of selected tracks.
In the Options window, set your desired ripping speed, ripping bitrate, set Created ID3 to YES
to do ripping along with the ID3 information if available or NO to disable this function.
Highlight these setting entries respectively, then press [ENTER] to switch the options.
After you finished setting, move the highlight to START and press [ENTER] to begin the ripping
procedure. If you want to cancel, move the highlight to EXIT, then press [ENTER] or just press
[RIPPING] on the remote control to exit the procedure.
After the CD ripping procedure begins, the system will proceed to the next menu page.
In Ripping window, there are a track progress bar and a total progress bar showing how much
the ripping procedure for the current track has been done and how much the total task has been
finished respectively.
During ripping, the option CANCEL is highlighted, so whenever you want to cancel ripping, just
press [ENTER].