Hyundai MSD 761 DRSU, Инструкция по эксплуатации

Страница: 72 / 112

ENG - 72
3.2 DYNAMIC
When you watch films with large dynamic scope in low volume, for example at night, you can
adjust the dynamic value up to avoid losing sound details resulting from the low volume.
4 VIDEO SETUP PAGE
4.1 VIDEO OUTPUT
OFF: Set video output to the CVBS.
YUV: Set video output in analog component video format if the component video outputs
are used.
P_YUV: Set video output as progressive YUV signals if the component video outputs are used.
RGB: Set video output in Red/Green/Blue format if the SCART output is used.
NOTE: If the video setting differs from the actual video connection, the TV set may have poor
picture. In such case, you are supposed to press [V-MODE] on the remote control repeatedly
to switch to an appropriate video output mode.
4.2 COLOR SETTING
4.2.1 SHARPNESS
There are three options (HIGH, MEDIUM and LOW) for you to choose in this item.
4.2.2 BRIGHTNESS, CONTRAST, HUE and SATURATION
Enter these items respectively, use direction key [ ]/[ ] to adjust the value, then press [ENTER] to
confirm it.
4.2.3 GAMMA
There are four options (HIGH, MEDIUM, LOW and NONE) for you to choose in this item.
4.3 FONT SIZE
Choose your preferred font size for the English subtitles in this setting item.
4.4 FONT COLOR
Choose your preferred font color for the English subtitles in this setting.
4.5 FONT BACK COLOR
Choose your preferred backround color, transparent or black, for the English subtitles in this
setting item.
NOTE: Setting entries FONT SIZE, FONT COLOR and FONT BACK COLOR apply for MPEG4
disc.
5 PREFERENCE PAGE
If there‘s no disc in the disc tray, the disc tray is open or the disc in the disc tray is stopped,
this item is available.
5.1 TV TYPE
This product supports both NTSC (National Television System Committee) and PAL
(Phase Alternating Line) television broadcasting standards.
PAL: If the connected TV is PAL system which is used in China, Hongkong and Europe, etc,
select this mode. The video signal of a NTSC disc will be output in PAL format.
AUTO: If the connected TV is multi system, select this mode. The output format of the video
signal will be in accordance with the video signal of the disc.
NTSC: If the connected TV is NTSC system which is used in Taiwan, America and Canada, etc,
select this mode.
The video signal of a PAL disc will be output in NTSC format.